Hygger digital quartz aquarium heater is specially designed for medium fish tank use, fast heating up for 15-30gallon aquariums.
It comes with 1 quartz heater, 1 IC temp controller and 1 thermometer, the cables are all long enough to be used indoors.
Main features of submersible heater:
1. Fast heating and reliable, fully automatic Keep watch over.
2. Black plastic heater guard with suction cups
3. For freshwater and saltwater use
4. The controller with memory function in case of power-down.
How to use the temp setting?
Press the button on the controller again and again, the set temp digits will go circularly from 61 to 90, when you set it to the digit
you want, stop and wait the led flashing for 3 times, then the setting is done and the led will go on displaying the water temp.
Heating indicator light
There are 2 indicator lights below the display screen, the left light will on red when the heater is heating, the right light will on green when it stops heating.
Over temperature protection.
The fish tank heater will auto shut off if water temp is over 97℉, and It’s going to automatically turn normal work when water temp is less than 95℉.
1. Keep the heater and thermometer fully submerged.
2. Don’t bury the heater under gravels or sands.
3. Keep the temp controller away from water.
4. Keep water circulation as far as imaginable.
5. Unplug the heater and wait it cool down before doing water changes.
Heater tube material: quartz glass
Plug: three-pin US plug
Power cord: heater cord 6ft，the controller cord 5ft, the thermometer cord 4.6ft
Heater tube length: 10.5 inch
Temp Keep watch over range: 61-90℉
Temp accuracy: ±1℉
Suggest for fish tank: 15-30 gallon
【Fast Heating Up】voltage 110-120V/60HZ, power 200W, US three-pin plug, heater rod length 6.3 inch, 200W submersible heater for fish tank 15-30 Gallon. The heater power cord is 6ft, the controller power cord is 5ft, the thermometer cord is 4.6ft. Temp range: 61-90℉. Fast heating up aquarium heater, it takes about 3 minutes to heat 3.5 gallon water up 3℉
【Fully Automatic Keep watch over】very easy and reliable to use. After finishing the temperature setting, the fish tank heater will run automatically by itself. It’s going to stop heating when the water temp reaches to the set temp, please note that the water temp may go up 1℉ more as a result of the waste heat. When the water temp is cool down to 1℉ less than the set temp, the tank heater will restart heating
【Will have to be Fully submerged】with strong suction cups on the heater guard and the thermometer, it’s easy to install the aquarium heater no to the tank walls or bottom, please keep them fully submerged. The thermometer must be away from the heater and keep water circulation as far as imaginable. We provide 1 year warranty for this heater, if get any issues, just contact the seller directly
【Digital LED Display Controller】the external IC temp controller can show the water temp with 2 blue LED digits. Only show Fahrenheit degrees. To set the temp, just press the button again and again until the screen displaying the temp you desired, then stop and wait the digit flashing for 3 times, the setting is done and the led shows the current water temp again. The controller is connect with separate sensitive thermometer
【Quartz Tube & Plastic Guard】With high-quality quartz glass tube, it’s very durable and explosion-proof, this fish tank heater can be utilized for saltwater and freshwater aquariums, service life will also be 3 years or more. With low profile black plastic guard, easy to hide in the tank. The guard can prevent your aquarium pets from burned, the gaps on the guard is about 3mm, no worries for fish stuck. The plastic guard mustn’t be exposed to air when the heater is heating