Hygger 500W digital quartz glass aquarium heater is specially designed for medium and large fish tank use,
fast heating up for 60-120gallon aquariums.
It comes with 1 quartz heater, 1 IC temp controller and 1 thermometer, the cables are all long enough for use indoors.
Other features of submersible heater:
1. Fast heating and reliable, fully automatic keep watch over.
2. Black plastic heater guard with suction cups
3. For freshwater and saltwater use
4. The controller with memory function in case of power-down.
How to use the temp setting?
Press the button on the controller time and again, the set temp digits will go circularly from 61 to 90, when
you set it to the digit you need, stop and wait the led flashing for 3 times, then the setting is done and
the led will go on displaying the water temp.
Heating indicator light
There are 2 indicator lights below the display screen, the left light will on red when the heater is heating,
the right light will on green when it stops heating.
Over temperature protection.
The fish tank heater will auto shut off if water temp is over 97℉, and will automatically turn normal
work when water temp is less than 95℉.
1. Keep the heater and thermometer fully submerged.
2. Don’t bury the heater under gravels or sands.
3. Keep the temp controller away from water.
4. Keep water circulation as far as conceivable.
5. Unplug the heater and wait it cool down before doing water changes.
Heater tube material: quartz glass
Plug: three-pin US plug
Power cord: heater cord 6ft，the controller cord 5ft, the thermometer cord 4.6ft
Temp keep watch over range: 61-90℉
Temp accuracy: ±1℉
Size: 300W (30-60 gallon), 500W (60-120 gallon)
【Quickly Heat Up】Voltage 110-120V/60HZ, power 500W, US three-pin plug, heater rod length 10.5 inch. Fast heating up aquarium heater, it takes about 3 minutes to heat 3.5 gallon water up 3℉
【Auto on and off 】Reliable submersible aquarium heater. It’s going to stop heating when the water temp reaches to the set temp, please note that the water temp may go up 1℉ more as a result of the waste heat. When the water temp is cool down to 1℉ less than the set temp, the tank heater will restart heating
【Fully Submerged】The heater tube and the separate sensitive thermometer should be completely submerged under water at all times. Please unplug it and wait it to cool down before you removing the heater or doing water change
【Led Display Controller】Only show Fahrenheit degrees. To set the temp, just press the button time and again until the screen displaying the temp you desired, then stop and wait the digit flashing for 3 times, the setting is done and the led shows the current water temp again
【For long Time Use】Very durable and explosion-proof aquarium heater, can be utilized for saltwater and freshwater aquariums, service life may also be 3 years or more. With low profile black plastic guard, easy to hide in the tank